Shampoo bottle holder for shower

This (shampoo) bottle holder for your shower is holding bottles up to 88mm diameter. It is mounted with removable wall holders for better shower cleaning, the wall holders are perfectly sized for Tesa power strips (sticky tape, waterproof version!). The height of the holder itself is 100mm, bottles can be obviously taller than that.

The standard fit is quite tight, so that everything is sturdy. In case your printer isn't capable of printing tight tolerances, just scale the wall holder in the respective axis. In case you need other sizes of the bottle holder, simply scale it in XY-axis and/or Z-axis. Remember that you might scale the wall holder in a different way due to changed tolerances after scaling. 

Print instructions: 

Material: PETG/ASA (highly recommended), PLA also possible

Walls/Infill: 3 walls, 20-25% infill

Speed: Print slowly (e.g. 0,2mm STRUCTURAL profile) to get nice overhangs and no curled edges

Happy printing! Would really appreciate if you give this model a like and upload your make!