Jetboil Collapsible Cup Storage Addition

Description:

This model is designed to sit on the top (or bottom) of a Jetboil flash 2.0.
The storage cup holds 4x Sea to Summit collapsible cups (https://seatosummit.com/en-ca/products/frontier-collapsible-cup).

Holes on the bottom are just for drying when not in use. I usually just throw in a paper towel when on the trail to absorb anything after use.

Print Details:

Printed in PETG, but would likely work in PLA or ASA just fine.

0.4mm nozzle, 0.2mm layer height

Printed with -0.1XY compensation to give the threads a bit of room. Worked well.

Print with support under the handle and the strap relief on the lid. Came off nicely and actually added a bit of a friction surface for the strap to grip on. 

Printed with fuzzy skin on the lid for grip getting it on and off (0.2mm depth and 0.3mm distance).

Post processing - only thing I do is round off the top thread on the cup, makes it easier to get the lid to start threading (thread alignment).  Takes a few thread on and off's to get the threads to be smooth. some light sanding would help speed that up.