Spice Rack Carousel
Rotating spice rack mounted on a printed slew bearing.
4
13
0
121
updated December 16, 2024
Description
PDFMaterials:
- 6x 3.5mm wood screws
- 3x 150mm Ø10mm wooden beams
Printed with PLA, 0.2mm layers and no supports.
Optional anti-slippery base printed with TPU as soft as you can get and glued to the bottom.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Beams changed to 10mm, thicker to 3mm plates, added conductor for drilling holes in the beams and anti-slippery base.
