Oscilloscope probe organizer - smaller version

I like the original design, but it was too wide for my compact size oscilloscope and I had not enough desk space for it. So I came up with this version. It has a footprint of 324x200mm and is intended to be used with smaller oscilloscopes like my Siglent 1104X-E. 

Printed parts

• cabinet_left
• cabinet_right
• drawer_1, 2, 3, 4
• 4x drawer_knob

Note: The drawers are not interchangeable, as the front face of each differs slightly

Other parts

• 8x Zip-ties (2.0-2.5mm)
• 4x m3 8mm screw
• 4x m3 washer (optional)

Assembly

• Combine the two ‘cabinet’ parts together using zip-ties as it is shown on the photo.
• Attach the knobs to each drawer with m3 screws and washers.
• Insert the drawers according to their part index (1-4, from left to right)

This model was designed entirely with CadQuery - a python module for building parametric 3D CAD models.

• Smaller footprint - 324x200mm, for smaller oscilloscopes, like in my case, Siglent 1104X 
• The two halves are combined together with zip ties, not screws
• The drawer knobs are printed separately