Traxxas TRX-4 body post adapter

I made this body post adapter in order to use an old HPI Jeep Wrangler body which I had from my old E-Maxx. It utilises a rear body post from the old style E-Maxx/ T-maxx trucks which had the round body posts, not the later type with the square posts.

As far as I know, HPI no longer makes this Jeep body, however the body post adapter may still be useful when using various other bodies.

Please note, I designed this to suit my TRX-4 which has been upgraded with aluminium shock towers. I don't know if it will fit with the stock plastic ones or not.

Requires (2) M3x10mm countersunk screws, and (2) M3x20mm button head or socket head screws.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Infill:

20

**Filament:** 3D Fillies PETG Black

Notes:

Printed upside down so supports aren't needed.

I recommend cleaning out the screw holes with a drill bit:
-The holes that need the screws threaded into them need to be drilled at 2.5mm (the 2 at the top, and the holes behind the shock towers.
-The holes where the screws pass through them need to be drilled at 3mm (the ones at the base, and the ones at the front of the shock towers).

Category: R/C Vehicles