Crank Arm - modified to work with 6mm screw rod
Description
PDFThe original crank was not secure enough with the single screw, so I modelled a hole that a 6mm bolt could fit into (give it a good push to get it into the hole) and can be screwed onto the bolt coming out of the bottom. Note - make sure you only turn the crank clockwise while playing
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The original crank was not secure enough with the single screw, so I modelled a hole that a 6mm bolt could fit into (give it a good push to get it into the hole) and can be screwed onto 6mm threaded rod coming out of the bottom. Note - make sure you only turn the crank clockwise while playing