Fidget handroller
this hand roller is for anyone who needs to move something with their hands when telephoning or in any other situation.
0
2
0
37
updated June 19, 2025
Description
PDFGeneral
The Figdet consists of three printed elements, each of which is required twice.
In addition to the printed parts, you will need
- four 525 zz bearings
- four m3x14 countersunk screws
Print settings
I have printed all parts with support and Brimm
The material I used was PLA, but anything else will do
I used 0.2 layer, but you can also use anything else you like
The assembly
can be seen on the pictures. But it is very simple.
Anyone who would like to support me is very welcome to buy me a beer.
JUST KLICK HERE
Tags
Model origin
The author marked this model as their own original creation.
