Christmas heart

We have had a long tradition of making Christmas hearts of glossy paper with trained fingers and a scissor. 

Here is a 3D printable version. Well a 3D model with only ONE layer.

Instructions:

There are two set of files, Red and White (you can print in whatever colour you want)

These two files need to be loaded into your slicer and assigned to each filament. A purge tower is recommended:

After printing:
Remove the heart from the build plate VERY carefully.
Bend it at the middle section. The little tap has to be bend over and inserted into the slot and there by lock the heat in the side.
The handle snaps together in the top and you have a Christmas heart ready for the tree. Can eventually be filled with a cookie or some sweet.

Printing details:
Material PLA, PETG
Nozzle size: 0.4mm
Numbers of layers: 1