Loft Zone Style Support

This is a support required for the LoftZone Storefloor system. I currently have 2 installed in my loft as I didn't have enough.

This has been tested and fit for purpose. Fusion static load test shows this can support way beyond what would be required for normal use however I cannot guarantee it will meet this criteria due to the printing process. 

I recommend printing this in PLA (allows greater flex than PET) at a higher temperature and lower fan speed to allow the layers to make a stronger bond. THIS WILL FAIL IF NOT PRINTED CORRECTLY.

Please check my pictures for correct print orientation. No supports are required.  

File is 280mm x 250mm x 75mm

Printer: Voron 2.4

Perimeters: 3

Infill Type: Gyroid

Infill: 10%

Material: PLA

Temp: 230

Supports: No