The Definitive Backscratcher

I printed the model that won the “backscratcher contest”: I liked it's look, it’s a really fun design, but it isnt a really good enough back scratcher for me. So i made my dream backscratcher. Let me know what you think!

Print with 0.4 noozle, at 0.2 layers with adaptative layer height so the rounded parts at the top are smoother. You may want to finish this region with a lighter and hand smoothing if it scratches too much (i do).

The heads print in 30min each, the handle in 1h, on a bambulab p1s standard settings.

To insert the dove tail put in place and press. It is a very tight fit. Depending on my filament it slides ok or need a pair of plyers for the final push. The clearance is only 0.3 so it does not move after insersion.

DISCLAIMER: I have carefully tested the model before publication (and more than 20 different lesser heads), the model is garanteed to bring you intense satisfaction on your itching regions,  at the extense that if may become addictive, SO be careful and use with moderation. I decline any responsibility for skin damage that may result from an excessive usage. Enjoy.

[edit] with some reluctance, I finally decided to include two more heads I had excluded because too aggressive: the nail-teeth head and the shark-teeth head. I dont recommend them but if you find the two regular heads too soft or are on the masochist side, you'll be served here.

PLEASE LIKE, COMMENT, POST YOUR MAKES. YOU CAN ALSO FOLLOW ME, OR SUSCRIBE TO MY CLUB TO GET MY OPENSCAD FILES.

I you want to sell prints of my designs, you can get a licence by suscribing the appropriate tier to my club.