SDL Remote WX Solar Weather Case

** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit.

18-Feb-19 I changed the depth of the case from 2 x 29mm to 2 x 34mm. This should reduce the issue of potentially very tight fit for several battery sizes. In addition I created a deeper thread section for the Thunderboard pole.

This is a Case for a remote monitoring Station based on the SwitchDocLabs WeatherStations. This case supports the Solar Panel, SunAirPlus, and the Grove Pro Mini with WeatherRack and Lora Module.

The Case is a remix of the excellent Customizable Rugged Waterproof Box from ZX82net.

The licence is inherited from zx82net licence. (I usually don't worry about non-commercial)

I have included the clips and latches I use from the original project, however there are some other options in the original project by zx82net.

This also uses the SwitchDocLabs Solar Panel Holder from the SDL site, although I have modified it to allow for a self tapper screw if you use the WXSolarFrame.