Add more slots to your Minimal Stand with this divider.
The Divider is 5mm thick, please adjust the peg's length accordingly.
Prints Settings:
- Supports: Tested with no support.
- Layer height: Tested with 0.2mm.
- Infill Pattern: 3D Honeycomb.
- Infill Percentage: ≥5%
Assembly:
- Sandwich it between two bases and drive the peg through like normal before placing the wall on both ends.
Tags
The author remixed this model.
Differences of the remix compared to the original
This is a separate divider for the base model that allows for the setup of multiple slots stand.