Asus ROG Strix B760I I/O Shroud

This shroud is meant to enable compatibility of the Asus ROG Strix B760I-Gaming WiFi motherboard with the Noctua NH-L12S cooler which features a 120mm fan (unlike the NH-L12 Ghost S1).

The shroud must be printed with the side facing the CPU cooler on the printer bed (as seen in the pictures), with tree/organic supports and a brim (post processing required afterwards).

The holes for the cover screws must be drilled out to ensure proper sizing (due to printing orientation). This will prevent the plastic from cracking once screws are tightened.

REQUIREMENTS:

• The VRM Heatsink needs to be cut to  a max height of 30mm from the base of the motherboard PCB (the one closest to the RAM slots).
• The Power Delivery Heatsink needs to be cut to a max height of 35mm from the base of the motherboard PCB (the one closest to the I/O Shield which envelops the original cover).

WARNING:

Following the above steps VOIDS YOUR WARRANTY. I will not be held liable for any modifications you choose to make to your motherboard/devices.