TXT Table Top Kit

Hello and welcome! I would like to present a remix of the excellent GEN2-QL Table Top Kit - Medium modular drawer model by Jerrari. I highly recommend checking out the entire collection, which you can find here: https://www.jerrari3d.com/.

Due to limited space on my workspace, where my 3D printers are placed, I decided to modify the drawer length to better fit into the already constrained desk area. I reduced the drawer length to 64 mm, giving them a minimalist appearance, but still providing plenty of storage space.

Additionally, I modified the base so it would fit the new length, and I have prepared three files for single, double, and triple drawer versions, offering flexibility for different needs. The design is completed with a modified top cover, in which I added a groove along the length to install LED strips for lighting.

Here’s the link to the LED strip I used: https://www.aliexpress.us/item/3256807337270135.html?spm. The LED strip is 3 mm wide, easy to install, and available in short pre-cut sections with an already attached USB plug. The lighting not only gives a great look to the whole model but also illuminates the contents of the drawers, making it very practical.

I warmly invite you to review and comment on this model – your feedback is very important to me! Feel free to visit my profile as well, maybe you'll find something interesting there.

Best regards!

In this modification of the GEN2-QL Table Top Kit - Medium, I shortened the drawer length to 64 mm to better fit the limited workspace. I also modified the base to match the new drawer dimensions. Additionally, I added a groove in the top cover to allow for the installation of an LED strip, enhancing the aesthetic and illuminating the drawer contents.