Quasit (small) - horned demon - 28Chibi

The players first came across these small demons via a pack of (apparent) goats and a very overwhelmed farmer. Several bad rolls later, we were all surrounded by these guys.

Sad to say things did not improve much from there.

These small demons may be a bit harder to print than other parts of the 28Chibi series due to the small stature and those little bird legs in particular, so I recommend going a little slower than you might normally print and increasing the number of perimeters for improved strength.

28Chibi is a new generation of minis made to be printed flat on the bed. Inspired by the likes of DutchMogul's DungeonDoll's and GrumpyRobot's FlatMinis, These:

• Print quickly and reliably on high- or low-end printers alike.
• Are sized for 28mm games such as D&D, Pathfinder, Shadowrun, Starwars EofE etc
• Storage is space efficient and safe due to the flat-pack & peg-and-hole base design (The peg is 2x2mm, so if the included base is not to your liking adding a slightly larger hole to your preferred base is a quick modification.)
• The hands are designed for modular equipment, and should generally also accept objects designed in the FlatMini style. The detail steps up in increments of 0.6mm, allowing for a variety of different layer heights to still print these crisply. 0.2mm is my go to, but higher or lower values (such as 0.1, 0.12 or 0.3) all work great too.