Lego Wreath Mount with Locking Stud

Remixed the original stud to cutout room for a bolt and two nuts. This enables mounting to a magnet.
5
11
0
102
updated December 13, 2024

Description

PDF

I cut out an area for a #8-32 bolt and nuts inside the original stud. This enabled me to attach a magnet to the stud to mount to my metal door. Not only does it look better than using a wreath hanger, but the heavy print is not flopping around.

I printed my wreath at 2x the original size. I uploaded the 2x size, but also the original size, still using the #8-32 bolt. 

For the 2x size, I used a 1 ½ machine screw, you'll have to measure the regular size yourself.

https://amzn.to/4fcK2fC

This is the magnet I used, but you could also get a smaller one:

https://amzn.to/4fkiDbs

I recommend two magnets, 25lbs is VERY sturdy on the door. Using at least two magnets helps keep the wreath shape as well.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I added a cutout for a #8-32 bolt and two nuts for mounting to a magnet. The magnet then becomes the mount for the wreath.

License