Hose or attachment adapters compatible with Ryobi stick vacuum

Each of these adapters has one end that fits onto Ryobi stick vac's with part numbers...
- PCL720
- PBLSV719
- PBLSV716
- PBLSV717
- PCL704 (requires accessory adapter that comes in the box with this vac)

Locking hose adapter (part C in pictures) fits onto the hose include with...
- A32K01 = 4pc Jobsite hand vacuum accessory kit
- P3240 = 3 Gallon Project Wet/Dry Vacuum
- PCL733 = 1 Gallon Wet/Dry Vacuum
- PCL734 = LINK 3 Gallon Wet/Dry Vacuum
- A32VH03 = 6 ft. x 1-1/4 in. Wet/Dry Vacuum Hose

Large reduction adapter (part D in pictures) fits onto common 2-1/2" Ridgid Dual-flex (black) hose (the vacuum end only)

Suggested print settings:
 - 0.20mm QUALITY
 - Prusament PETG (pictured using OVERTURE PETG Grass Green)
 - Infill density 20%
 - Infill pattern Cubic
 - 3 Perimeters
 - Supports are only required on the locking adapter (part C in pictures)
 - Brim is not required as it's built into the model, use a hobby knife after printing to remove it from the inside of the tube

Don't have a 3D printer yet? That's OK, order already printed from…

https://jpelectron.etsy.com