Tacklife ELY01 support

I made this object to have the electric lighter at hand, I thought of putting magnets so that I can stick it in the refrigerator. the first model I made I had put 3 magnets, it could stay attached but it wasn't enough so I added another one.

Infill: 20%

Supports: no

Resolution: 0.20

Filament: Pla-Petg

you will only need 4 magnets 20x6x2mm you will not need to glue them they must be inserted an interlocking.

https://it.aliexpress.com/item/1005002812559904.html?spm=a2g0o.9042311.0.0.486f4c4ducgcFO

Did you like the model? Support me with a donation here:

https://ko-fi.com/david3design