FLW Clock

This is a FLW (Frank Lloyd Wright) inspired clock.  I designed this based on a picture that my daughter took of a panel while on a FLW tour.  The easiest way to print this is face down.  I printed this on my Artillery X2, but since then this printer has been replaced by a X1C.  Because it was designed for a single tool head you will see that the files are split into each color, one per tool change.  This will require a spool change for each print file.  If you’re interested in printing this, I’d recommend doing some research on multicolor first layer printing methods.  Printing with a different printer with multiple color capability would be easier and you’d be able to simply print the .STL file as is after assigned colors.

The lighting is a simple LED strip that is controllable via WiFi and remote.  To eliminate any difference in lighting I used COB LEDs which provide a smooth light instead of individually viewable LEDs.  The can be glued on the back of the clock and adjusted for the intensity desired.