Snowy Smiles - Christmas Bookmarks Set

__________________________________________________________________________________________________________
☀ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀
____________________________________________________________________________________________________________

🎄☃Add some holiday cheer to your reading with the Snowy Smiles bookmark set! These bookmarks feature adorable snowmen with cozy scarves and hats, surrounded by candy canes, sparkling snowflakes, and festive vibes. Perfect for cozying up with a book by the fire or as a thoughtful stocking stuffer for your book-loving friends! 🎄☃

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA 3D Jake Eco White Transmission Distance: 2.5
PLA Jayo Matte Orange Transmission Distance: 3.6
PLA EryOne Rose Red Transmission Distance: 2.4
PLA EryOne Matte Navy Blue Transmission Distance: 1.5
Color Pallete:

Swap Instructions:

Start with White
At layer #7 (0.65mm) swap to Matte Orange
At layer #11 (0.97mm) swap to Rose Red
At layer #15 (1.37mm) swap to NAVY BLUE for the rest..