3D printable jigs for PiSphere Spherical time-lapse camera that uses RaspberryPi 5. https://github.com/0kam/PiSphere/
1
4
0
53
updated December 11, 2024

Description

PDF

PiSphere: RaspberryPi 5-based time-lapse camera for 360° images

Overview

This project is for creating a time-lapse camera that captures 360° images using a RaspberryPi 5.

The camera is designed to be powered by a small solar panel or battery and to operate intermittently using an RTC (Real-Time Clock) to power the device only during shooting times.

See https://github.com/0kam/PiSphere/ for more detail

Print Settings

  • Using ASA (or ABS) is highly recommended for the MountForBCAP151509G for durability and toughness.
  • I used PolyLite ASA filament with 20% Gyroid infills.
  • No supports is required except for the insulock hole of MountForBCAP151509G.

Hardware Components

Assembly

  • Place Raspberry Pi 5 on BasePlate.
  • Wire the cameras to RaspberryPi using CSI cables.
  • Place TopCameraMount on Baseplate using 4 M3 x 10 bolts
  • Place CAM0 camera on TopCameraMount using 4 M3 x 10 bolts
  • Place BottomCameraMount under BasePlate using 4 M3 x 16 bolts
  • Place CAM1 camera under BottomCameraMount using 4 M3 x 10 bolt

Tags



Model origin

The author marked this model as their own original creation.

License