Es wird etwas am Drucker verändert, alles auf eigene Gefahr! ich übernehme keine Haftung für eventuell entstehende Schäden, nur anwenden wenn ihr euch sicher seit.
(Da sich dies an erfahrene Personen und Fachleute richtet, erörtere ich die Herstellung und den Einbau bzw. tausch der Lüfter hier nicht im Detail)
Da mir die beiden Lüfter welche im Boden des K1c verbaut sind zu laut waren (Netzteil und MCU Fan), habe ich diese durch 92mm x 14mm ersetzt.
Hierzu habe ich neue Bodenbleche aus Blech gefertigt (Lasercutter)
Einmal als Standard Lochgitter Version, und eine weitere mit einem Einzelnen Loch (= keine Turbulenzen beim Luft ansaugen)
Bei der Version mit einzelnem Loch habe ich noch ein Flow-Grid mit angeschraubt.
Flow-Grid PC Fan 92-120-140 von Marcy93 | Kostenloses STL-Modell herunterladen | Printables.com
[ Gerne bei Fragen, Interesse oder kleinen Änderungswünschen kontaktieren ebenfalls wenn ihr mich Unterstützen wollt :D https://www.paypal.com/paypalme/clwmarcy ]
Some Changes are done to the printer, all at your own risk! I accept no liability for any damage that may occur, only use if you are sure.
(As this is aimed at experienced people and professionals, this guide is not too detailed)
Since the two fans installed in the bottom of the K1c were too loud for me (power supply and MCU fan), I replaced them with 92mm x 14mm ones.
For this I made new base plates out of sheet metal (laser cutter)
One as a standard perforated grid version, and another with a single hole (= no turbulence when sucking in air)
For the version with a single hole I also screwed on a flow grid.
Flow-Grid PC Fan 92-120-140 von Marcy93 | Kostenloses STL-Modell herunterladen | Printables.com
[ Please feel free to contact me if you have any questions, interest or small change requests, also if you want to support me :D https://www.paypal.com/paypalme/clwmarcy ]
I want to thank HENLOR Henlor | Printables.com , his K1 CAD files are very handy when it comes to modeling. it saves up a lot of messuring time.
Check out his other stuff
The author marked this model as their own original creation.