Two Piece Body Hovalin 4/4

With a larger print volume of 300x300x300 the waist and lower bout pieces can be printed together. I removed the connection from the interior to allow more open space inside the violin. Hopefully, this will produce better sound quality.
 

Note: The piece can be printed in either direction, however, I found using support on the waist makes the round surface on the tail gut smoother.

All the other parts of this model are standard and can be download from the Hova Labs site.
https://www.hovalabs.com/hovalin/docs

The license included with the download from Hova Labs says:

These files (Hovalin v5.1.0) are licensed as Creative Commons Attribution-ShareAlike 4.0 International License.

This means that you are welcome to modify and distribute the design and derivatives thereof. You must, however, share your design under this same license and give credit to Hova Labs, LLC with all derivatives and copies. You may use the Hovalin for commercial purposes under these same constraints.

If you wish to use assets from the Hovalin or hovalabs.com for any media or promotional purpose, please contact us at [email protected]