Banana-tek

This spinning lure was inspired by two very successful commercial wobblers P. boomerang, and S. bullhead and solves the problem of broken lips by placing the lip in a groove without gluing, that makes lip removable. There is a cavity in the lure for inserting a ball from the neck of a bicycle for rattling version. The model also has a reduced groove for inserting a wire structure, for easier gluing with epoxy, the model allows the skeleton to be closed using  3D pen.  The needle at the bottom  is intended to prevent the model from automatic settling on the mat. 

The wobbler has a snake-like action and is  floating, shallow-diving. You can also experiment with the shape of the blade, widening and shifting the active area of the lip increases the aggressiveness of the action, but reduces the dorsal movement that is essential for banana -like wobblers.

Material: PLA, PET-G, lip: PET-G, PCT-G, PC

Layer height: 0.20 mm, top, bottom, wall 1 mm, 

Pause for ball insert at layer 144