Tiny whoop Camera canope and antenna mod

13.12.2024: I added another version for cameras with antenna that is attached to the center of the camera like the AKK KC53 Mini VTX

This is a canopy for a small FPV Kamera like Zerodis FPV AIO Camera mounted on a mobula tiny whoop 65mm frame
you can adjust the camera angle by using another mounting hole.


it protects the lense quite well.

the weight of the canope is 1.4 gr
The total weight of the whoops is 20 grams without battery

print in TPU.

Below you can see my antenna mod to save weight. I used thin coaxial cable from an old laptop. The tip was stripped to 12.92mm for 5.8Ghz VTX transmission. The antenna is extremely robust. The cloverleaf anntenna is to Heavy and to bulky!


Information about the camera:
I don't want to advertise the Zerodis FPV AIO Camera too much here, it's not particularly good, but it just about does the job. It's light, and I needed a replacement because the internal VTX is broken. The AKK KC53 Mini VTX is way better, with the antenna mod it weights the same: 3,8gr 
 I have not tried the Wolfwhoop WT05 Micro AIO 600TVL