Subaru Outback Gen6 Wireless Chargers

I like my new car's wireless CarPlay feature, but the added power drain made me wish I had a wireless charger. One charger for the little cubby under the headunit and a second in the center console tray makes a nice pair of chargers for you and a passenger. These should theoretically fit any 6th generation (2020 - 2025) Subaru Outback or Subaru Legacy, but I can only vouch personally for the 2025 Outback. 

These are deigned for an iPhone 13, and will only work if your phone has a MagSafe compatible case with a smooth bottom profile. If the camera sticks out from the phone, it will not seat correctly on the charger! You'll need to modify the design if your phone setup is different. 

Both of these designs are intended to be installed with the OEM rubber inserts removed from their locations. The inserts are simply press fit into place and can be removed quite easily. 

These are designed with about 200um of clearance, so make sure your printer is tuned nicely for best results. Obviously PETG/ABS/ASA/PA12 is preferred so the parts don't deform in the summer heat!

I used this short 90 degree USB cable:

https://www.amazon.com/dp/B07PFHB3R4

And this two pack of wireless chargers:

https://www.amazon.com/dp/B0DLP157QH

Feel free to use the included STEP files to customize the design with your favorite parametric editor.