Geared fidget widget

This is my go at it:
Since I'm not good at modifying STLs, I modeled it from scratch:

• slightly smaller than original,
• higher tolerances (0.3mm per side)
• added gear instead of round side ;-) Real involute teeth with module 1.5
• rounded edges
• hole in the middle instead of two indents with bridging => more ready to print

• champered snap in part for more easy assembly - also longer axis for better stability Print 6 if the single components and snap together like the original. Assembly is just for viewing; don't think it would work print in place.

  Print Settings

Printer Brand:

Anet

Printer:

A8

No

Supports:

No

0.2

Infill:

26