Versatile and Easy-to-Build Bench Vise for the Festool Multifunction Table MFT 3
I currently dont own a Festool table so I have no way of testing it atleast that I know of so there may be some missed tolerances if there are any please give me some feedback so I can fix/improve it.
ASSEMBLY GUIDE:
1:Prepare all of the parts (I got a missing screw in the picture)
2:Snap in the viseholder into the slider like shown.
3:Put nuts into the holes on the slider and glue them down.
4.1:Gather all of the parts
4.2:Use the pliers to connect the smallgear with a smallshaft through the holes on the slider.
4.3:Put on the handle(glue optional)
4.4:Put bigshaft through the biggear as shown on both sides(make sure the bigger end of the shaft is facing the same direction as the handle)
5.1:Prepare parts.
5.2:Cut the stripped wire into 4cm/1.57inch lenght pieces both
5.3:Put the leadscrews on the bigshafts as shown.
5.4:Put the wire into the holes make sure they are as far as they can go. Bend the wires around the screws as shown.
6:Put on the padholder.(make sure the cutout faces the direction on the handle)
7.1:Prepare parts shown.
7.2:Put on the padholderstationary like shown.
7.3:Screw it down(1 screw minimum).
8: Choose a pad you want to use and enjoy.
The author marked this model as their own original creation.