Festool KA-65 3 Degree Wedge

Hello!

This file is to go with the Festool KA-65 to allow edgebanding to be put on surfaces with a 3-degree bevel. The plate on the bottom of the platen comes off with the four screws, allowing the print to slide underneath, before putting the plate back on with the screws. 

Ran my print at standard settings with nothing special whatsoever. PLA+ for strength and ease of printing. I've ran hundreds of feet of edgebanding at this point with no issue on the print. Works like a charm for a very niche problem. 

Thank you!