Filament Info Panel - Color and Remaining Weight.

Filament Info Panel - Color and Remaining Weight (fixed to 3 digits e.g. 999 grams). The width is 75 mm approximately. This size is choosen as it fits boxes of the following brands: Prusament, Basic Filament, Real Filament, 3D Jake and probably others as well.

Meant for the box of a spool of approximately 1000 grams.

Consists of 3 part types, so the assembly can be printed with a single extruder:

• Vertical part to carry the digits (white in the pictures).
• Digits to be clicked into the vertical part (matte black and white in the pictures).
• Horizontal part to stick under the filament box (miscellaneous colors in the pictures).

Notes

• The horizontal and vertical part are a tight fit.
• The assembly can be taken apart repeatedly for example when the weight of the spool changes or when it is to be used with a different filament color.
• Initially you will notice that, because of the tight fit, assembling it will require a bit of force. This will improve after a couple of times.

Printing

• Fill density: 15%.
• Fill pattern: Gyroid.
• Filament type: PETG but PLA should work as well.