Christmas ornament with your name

Christmas ornament with your name

Size:

• 65x71x3 mm

Instruction:

You load the model into your slicer. In the "Prepare" tab, click on the model, then select the tool to add text from the top menu.

Choose the font, size, and set the thickness to 0 if you want the text to be neither raised nor recessed. Positive values will make the text raised, while negative values will make it recessed. In my model, I set the embedded depth to 0.5 to reduce wasted filament.

For ironing, I set 45mm/s, 5%, 0.15mm, but you’ll need to adjust these on your printer to get a smooth print.

I also recommend rotating the model 180 degrees with the top layer facing down to get the table surface texture.