Vacuum Attachments [Severin HV 7146] _Remix

Extended by 25 mm and modified the geometry to have to a single material print with "teeth".

For the rest please have a look at the original model.

Print orientation

• Put it flat on the build plat like shown in the pictures. you only need support on the build plate, the bridging worked nice on my A1. Your milage might vary here ;)
• if you have super bed adhesion you can print upright. Please note that mine failed despite a generous inner and outer brim

I remixed in Onshape

Extended by 25 mm and modified the geometry to have to a single material print with "teeth".