Log Tree House

Another log house build this time it's a Log House on a Tree.
I really like log houses, you can find previous models on the links below

The model is currently under construction, I had to use my postponed MK3S+ to help me. Because I modeled more realistic parts from logs, this model is more difficult to print, especially for the orientation of the parts when printing, for some overhangs it is advisable to use supports. For high parts, use a collar. The stl are oriented as I print them.
If some parts are going to be heavier, for example, the steps into the trunk, sand them a little, or the landing surfaces from the logs

The house is built!!!

I created small guide lines on the beams to better connect the parts.

I am not a carpenter, nor a log cabin builder, nor an engineer, I am just a 3D hobbyist, if there are any errors, write, we will try to find the best result

If you get the parts mixed up during construction, /like me/, side views of the shapes of the logs in the individual layers will help you.

Picture assembly instructions:

If you want a removable roof, connect it with connectors and simply place it on the building.

Other log cabin models:

https://www.printables.com/model/516304-big-log-house

https://www.printables.com/model/481443-bulding-kit-of-a-log-cabin-model