Wemos D1 Mini Enclosure for WLED

YA case for a Wemos D1 Mini case.

I designed it KISS without acces to the unnecessary USB connector. The addressable 300 RGWB LED strip SK6812 is connected to a 5V/10A power supply and supplies the D1 with power. The rail in the base is shorter on the right-hand side so that the soldering points of the cables do not rest on it. The two bumps in the cover fix the D1 from above against the two rails without pressure. The blue led of the D1 is visible through the ventilation openings on the back where it does not dazzle.

No glue needed to assemble the two parts.

• Print in PLA or PLA+
• Infill about 20%
• No supports *5mm brim without gap is a good option to prevent warping.