HueForge Iron Maiden-Eddie

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 174.82x200mm in size. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2mm and the Actual Depth is 1.9mm

Filaments Used:

PLA Crealty Matte Black 
PLA Elegoo Matte Gray 
PLA Elegoo Matte White 
PLA Elegoo Red 

This print uses 4 unique filaments

Swap Instructions:

Start with Matte Black

At layer #7 (0.64mm) swap to Matte Gray

At layer #11 (0.96mm) swap to Matte White

At layer #14 (1.2mm) swap to Red for the rest.