Shelly Mini Smart extension cable housing (no Screws)

This is my solution for a cheap smart socket cable. Make every device smart and measure the power consumtion. 

I was inspired by Shelly Mini Housing von Juzz Wuzz Also take a look at his works.

I hate screws and have no thread, so I designed an optimized housing without screws myself. It's also more compact and has a window on both sides for better heat distribution.
 

BOM

• Shelly mini (1PM with power measure sensor)
• Power extension cable 
• 2 Wago 221-412 or similar
• 2 small cable ties

I recommend printing with PETG, but the sample was printed with PLA and 0.15mm layer height and worked fine. Printed with Prusa MK3S+ 

No supports needed, Infill 15% 

Please ask if you have any question. and don't forget to show your prints as makes

Exclusion of liability: I disclaim any liability in connection with the printed object and its wiring. You are responsible for your actions. if you don't know what you are doing, don't do it