XMAS NEON LED star

XMAS NEON LED star to add to a window with super easy installation.

Parts used:

• 12V/2A power supply wit barrel jack 
• Around 35cm of an 12V WS2811 neon LED strip 5m (6mm width, 10mm height)
• Some 0,25mm² wires in transparent color 

Wiring:

• If you want to use white color only, you can use the barrel jack adapter delivered with the power supply to connect the “-“ output to the “white“ cable of the neon LED adapter and the “+” output to the “red” wire of the neon LED adapter. The cable has markers on it to see which is + and + on the other end too.
• After you press the neon LED strip onto the printed star you simply need to cut the strip on one of its markers shown on the side of the neon LED strip. The star is sized to hold the strip 1 way around with not much overhangs of the LEDs as shown. 

Printing instructions:

• 0.2 speed profile
• No supports needed
• No brim needed

Happy printing =)