Cabinet Corner to fix a wooden plate on top of a cabinet with screws.

Use four of these Cabinet Corners to fix the position of a separate plate on top of a cabinet so that it does not slide of. The cabinet itself is not damaged as this fix is external to it.

Inner legs: 70 mm.
Outer legs: 85 mm.

Height: 15 mm.

Hole diameter: 10.5 mm.
Hole depth: 12 mm.

Hole diameter: 6 mm.
Hole depth: 3 mm.

Printing

Fill density: 25%.
Fill pattern: Grid or Gyroid.
Filament type: PETG or PLA will do just fine.

Note: be careful to not damage the outer layers of the print when fastening the screws.