Ikea Skadis desk mount and connector

I wanted to mount my ikea skadis in a right-angled corner on a wooden surface. This increases stability of the skadis board (no more wobbeling with many tools on it).

It consists of two parts that are used to connect the 2 skadis boards on aright-angled corner:

• One to connect both boards and also screw it down to a plate
• One to connect the boards at the upper corner

The holes for the screws to hold it down to a plate are 4mm

To connect it to the skadis, the original screws are used. I have also used the distance cylinder of skadis to define the distance to the wall behind.

Print Settings

Rafts: Not necessary

Supports:  Not necessary 

Resolution: 0.4 mm

Infill:  20%