Clip to fasten garlands to a porch handrail

Made to hold down garlands onto a wooden porch handrail or posts.

Version 1 is just a prototype that worked for my use.

Version 2 is reworked 2mm wider to fit a little looser, has 3mm fillets on all angles except the bump that is supposed to fit loosely coupled into a groove present under my porch handrail. Also 1mm thicker wall and 1mm extra room in opening. Reduced to 10mm Z-height.

The 3rd model is for fasteing garlands to a post measuring 73mm x 48mm (rounded up), with holes in case there's a need to use thin wire to ensure in stays.

Print in PETG - 100% infill, otherwise it will most likely snap.