"Snow" Globe Christmas Lithophane

This is a remix from Taylor Herrin. For more infos how it is created see at the original model. The scupture were so nice but I wasn't able to print it due to net errors. So I repaired it with Blender. In addition for faster processing time I also simplified the net with PrusaSlicer. And here we are: A model with 1/10 of file size and no errors.

Printed with standard configuartion of 0.2mm layer height and 0.4mm nozzle. I printed it without support resulting in a bit fuzzy details at the lower end (see picures). If you scale it up I would recommend organic support. The hole has a diameter of 15mm, from here you can calculate the scale to fit your electrical (!) teelight e.g. 21mm: 21/15 = 1.4 = 140% scale.

Happy printing :)

• repaired mesh
• reduced triangles