There are two tiles, 1x1 and 2x2 compatible with Connetix tiles. Of course it's way better and cheaper to go buy the actual tiles than print basic squares but I have uploaded the bases I used to make my Mario Warp Pipe for figurines in the hope someone might use them to create some more magic I can download for my child.
I used .4mm nozzle, 15% infill and no supports. I pause the print just before the capping layer for the magnet holes is printed then insert the magnets before continuing the print. Connetix tiles alternate the polarity of the magnets so I found the easiest way was to place all of the magnets on an existing Connetix tile then place them on the print in the exact same spots making sure not to accidentally flip a magnet.
The magnets I used are pictured from Bunnings Australia but I have included the Fusion files with parameters so you can adjust them if you can't find the same size. The finished tile is 7mm thick with smooth top and bottom ready for customisation (pictured tile is 9mm thick due the raised brick pattern).
Please let me know if any changes need to be made in the Fusion file so it's great for everyone.
The author marked this model as their own original creation.