This is a warp pipe made for Connetix magnetic tiles with an open hole for figurines to go through. There is an option for 1x1 squares and 2x2 squares for larger figurines. The magnets I used are pictured from Bunnings Australia but I have included the Fusion files with parameters so you can adjust them if you can't find the exact same size. Due to the brick pattern the tile ends up 2mm thicker than an original tile.
I pause the print just before the capping layer for the magnet holes is printed then insert the magnets before continuing then pause again for a colour change for the pipe. Connetix tiles alternate the polarity of the magnets so I found the easiest way was to place all of the magnets on an existing Connetix tile then place them on the print in the exact same spots making sure not to accidentally flip a magnet.
I used .4mm nozzle, 15% infill and supports only on the outer overhang of the pipe near the top. I removed supports then gave the brown bricks a little hit with the heat tool to remove any little marks the supports made.
Please let me know if anything needs to be adjusted in Fusion and I can update it.
The author marked this model as their own original creation.