desk clock · assembly

desk clock · assembly

modern minimalist desk clock assembly for the bambu clock components kit

the dials for the hour, minutes and the cap have very small tolerances to have a very tight fight, having been optimised for bambu matte pla, make sure that you're filament is properly dry, and if using a filament that has more shrinkage, you can use a deburring tool to very slightly increase the hole until you can assemble while maintaining a tight fit. 

to assemble, have the clock kit already bolted to the face, than place it on the desk horizontally in order to be able to apply pressure on the dials on both sides equally until it gets into position

dimensions in mm ~ x:104 · y:68 · z:85

photos show printed in mandarin and dark green matte pla, matte charcoal and brick marble pla, and black walnut and classic birch wood pla

• .40mm nozzle
• .20mm layer height
• 10% cubic infill
• detect thin walls
• slowed down first layer and bridges
• tree supports on the outer shell

notes

• includes bambu studio 3mf file and STLs
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on my patreon