Prusa MINI Enclosure Damper Extension (for squash ball feet)

If you have squash ball feet on your MINI and wish to use the dampers that come with the MINI enclosure, you will need:

- Print 2 of these extensions
- x2  35mm M3 bolts

The extensions and 35mm bolts should be added to the dampers on the Left side of the printer, as shown in the photos.  The damper on the right shouldn't need an extension (3rd photo)

I am using these squash ball mounts: https://www.printables.com/model/34936-prusa-mini-squashball-feet-low-profile-noise-reduc