75x75 or 100x100 Monitor Mount

Please be gentle, this is my First Fushion 360 model.

Designed to Fit a 75x75mm or 100x100mm Vesa mount into a already existing Dual/Single monitor Mount Pole from Amazon. 

You will need at minimum the (base, and monitor mount, & Vesa Mount each extension is 50mm threaded!)

1 M6 x 20 screw and nut.

1 M4 x 12 screw and nut.

Don't overtighten, there is enough friction in the design to allow for minor adjustment without fully tightening.

Orientation is key when printing with threads!