Temtop M2000 series air quality meter wall bracket

This is a wall mount bracket for the Temtop M2000 series air quality meters. 

I designed it to make long term monitoring more practical, and to keep the screen visible, as the meter itself is designed with a handheld form factor. 

I hope this will be useful to anyone wanting to use these meters in environments such as homes, offices, or classrooms to monitor air quality as a mitigation against COVID.

Two versions are included; one with a flat base for easier printing, and one with corner radii, which looks nicer if your bed adhesion is up to the job.

I printed the radiused base version in PLA on my MK3S+, at 20% Gyroid infill, but it should work well in most filament types. I added two modifiers to increase the infill to 80% around the screw holes for extra strength there - mostly as an excuse to have a play with modifiers!

Some bed adhesion was lost during the print, which led to a slightly domed bottom surface, but the print did complete successfully. As a result of this, I created the version with a flat bottom, which should be easier to print if your bed adhesion isn't perfect. 

The bracket attaches to the substrate with 2x countersunk screws, on 30mm centres. The centre of the top screw hole is 10mm from the top face.

Send me a message if you want a version with different mounting holes, as this can be tweaked very easily in the CAD model.