Busts Bahador Lionclaw

Temperature:

• Extruder: 200–230°C (check the specific requirements of the silk filament you’re using, as it may vary slightly).
• Print Bed: 50–60°C for stable adhesion.

Printing Speed:

• 40–60 mm/s: Silk filament tends to highlight details and gloss, so a lower speed helps to improve quality.

Layer Thickness:

• 0.2 mm: For a good balance between detail and printing time.
• 0.1 mm: If you’re aiming for very high detail (but it will increase the printing time).

Retraction:
Adjust retraction to avoid stringing (unwanted thin filaments between parts):

• Distance: 1–2 mm
• Speed: 20–50 mm/s

Note: I cannot include the STL files as they are part of a package that is for sale. I’ve only attached the images to showcase the print quality of the MK4S.

Loot Studios