Cozy Cabin - No AMS (or similar system) required

This model makes use of Bambu Lab's Lamp Kit, but should accommodate any light source you have available to you

If anything could ever make you wish you could shrink down and live in a small house, this certainly would!

Light up your home with this Cozy Cabin Lamp decor!

Invite your neighbors over to look at it so they can know you're better than them! (j/k, don't do that)

A tolerance test is included so you can gauge how well tuned your printer is before starting on this model.

Assembly Instructions:

Refer to the attached guide for assembly You can also refer to this video

Printing Instructions:

Several components of this cabin utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.

There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.

Roof:

• Layer Height: 0.2mm
• Supports: Tree/Organic supports

Cabin:

• Layer Height: 0.2mm
• Supports: Tree/Organic supports

Chimney Smoke: (This will make it so your smoke glows with the rest of the cabin)

• Layer Height: 0.2mm
• Wall generator: Arachne
• Bottom shell layers: 0
• Infill density: 0%
• Wall loops: 1
• Brim: Outer brim
• Brim width: 15mm
• Brim object gap: 0.1mm

Windows:

• Layer Height: 0.1mm
• First Layer Height: 0.1mm
• Pause at Layer 3 for color swap
• Pause at Layer 21 for color swap

Side Door:

• Layer Height: 0.1mm
• First Layer Height: 0.1mm
• Pause at Layer 3 for color swap
• Pause at Layer 31 for color swap

Front Door:

• Layer Height: 0.2mm
• Pause at Layer 29 for color swap

Porch Lattices:

• Layer height: 0.2mm
• Pause at Layer 3 for color swap

Everything else:

• Layer Height: 0.2mm
• Supports: No

Don't be afraid to give me feedback if you feel something can be improved!