Photo Christmas Ornament

Dimensions

Ornament Diameter: 70mm

Photo Diameter: 48.5mm

Print Recommendations

Everything is print in place. I used 0.1mm to make it look cleaner. A larger layer height should work, but may lead to the rings getting stuck. 

The rings will have some resistance so you'll need to push them with some tweezers to get them to rotate. The center isn't supposed to rotate so don't try to, or do idc.

Photo

Whatever photo you want to add should be less than 48.5mm. I used printer paper, but photo paper will also fit. You will have to shove the sides into a small lip that surrounds the photo slot. The lip makes the photo look nicer incase the circular cut isn't even.